3W Tent Wood Stove (Korean Titanium) Folding [30% off]
Wild Wild West
Updated May 27, 2022: Forwarded item first come, first served
The 3W Folding Tent Wood Stove is designed to turn a backpacking shelter into a Luxe hot tent! This stove is made of titanium, so it is ultralight and folds completely down to fit into a storage pouch. Optimized to heat 2-6 Person sized tents, teepees and hammock shelters. Stove kit may include a packable titanium stove, rollable pipe, spark arrestor grade, and storage zip pouch. Perfect for those cold weather backpacking adventures!
3W Folding Wood Stove Video
About Folding Wood Stove
The 3W Folding Wood Stove is made up of titanium, stainless steel and glass. It is rectangle in shape, with a flat top surface. It has a single door, with a glass window for viewing the flame from inside the tent. The door also has a slidable air intake, so that you can fine-tune the burn rate.
The stove top has a rib for less warping in high heat. All walls have channels to hold them into position after warping does occur. The stoves rectangle shape, makes it possible to boil water and cook real food with an ultralight pot or pan.
The whole stove system is stored by removing the four bolts from the stove body, folding down each wall, rolling up the chimney, and then storing it inside its storage pouch. This makes it ultralight and packable. You can put it inside or outside of a backpack, or wherever you need it on your adventure!
Wood Stoves Specs
- Kit May Include: Wood Stove, Pipe, Spark Arrestor card and Storage Pouch
- Material: Korean Grade 1 Titanium (body) rated to 1382F, Stainless Steel (door parts and chimney) and German Tempered Heat Resistant Glass
- Fire Box Size: 13.5" (length) x 7.8" (width) x 6.6" (body height) = 695 in³ (cubic inch)
- Stove Body Weight: 2.18 lbs (34.8 ounces)
- Total Kit Weight: 4.01 lbs (64.1 ounces)
- Similar: Huge XL Wood Stove base camp version
- Stove and Pipe Total: 7.56' (height) [10.8' with longer pipe]
- Door Opening: 5" (height) x 5.5" (width)
- Wood Pieces: 12" (length)
- Only Stove Pipe: 6.56' (length) x 2.25" diameter (width) - [9.8' pipe currently not available]
- Not Included: Snow and Sand Leg Base or our 35a Fire Pit Adapter
Folding Stove Body Assembly
The folding stove body comes full apart at each of the main seams for storage and packing. Then it simply comes together by sliding the exterior walls together, closing the stove top like a shoebox and then inserting the four bolts (which also double as stove legs) through the corners of the main body. Then nuts secure it all together in place.
Rollable Chimney Pipe Assembly
The stoves stainless steel chimney is put together by removing its velcro storage strap. It will naturally unspool at this point (wear gloves). Then you slide the chimney rings over the end one at a time, until they are all evenly across the pipe; forming a long tube.
It is necessary to have two people assemble the chimney into a tube shape for the first time. Once the stove is burnt-in, then the pipe will more naturally come together. Stove pipe should be cut with scissors to achieve desired length, to match the specific shelter.
Spark Arrestor and Pipe Connection
The wood stove comes with a spark arrestor section assembly. This acts as a connection from the chimney pipe to the main stove body.
Once secure, the spark arrester can be inserted into the slot on the side of the connection. The airflow and burn rate is fine-tuned by adjustments.
Hot Tent Shelter Shopping?
Pairing a Tent with Wood Stove? Check out our Hot Tent Guide
Note: Design has small updates than what is shown. Stove must be Burnt-in for the first time outside or in empty shelter. Wood is the only fuel source, wood is not included. Manufactured in Korea as Wstove. Wear gloves to assemble and operate this stove.