Tent Chimney Pipe Protector Sleeve for X3 Wood Stove Preorder
Wild Wild West
Interest-free payments in Checkout via Shop Pay
Updated June 15, 2021: Ships via Preorder end of June.
The Tent Protector Pipe Sleeve is used to prevent outdoor shelter without an stove jack, fabric from touching the hot stove pipe. Stove pipes can often get very hot, if you have a well stoked fire chamber. This stainless stove pipe sleeve is designed for the X3 Wood Stove, but will work with any tent wood stove with the same pipe diameter. A valuable accessory for hot tents!
Using a Tent Protector Sleeve
Wood stoves can be often placed in shelters, without the use of a stove jack (at own risk). This stove pipe sleeve prevents the fabric from touching the hot stove pipe; which is the primary purpose of a stove jack. You place this sleeve only at the point of where the pipe exits the shelter; as a heat shield.
This pipe protector is held in place by gently tightening the three screws, until the stove pipe is centered in the middle of the sleeve. The stove pipe inserted, must be in a smaller diameter than the Tent Protector, so that there is empty air space for a heat buffer shield. Can be used on some large tent doors (using damper) and zipped up tight around the pipe!
Stove Pipe Sleeve Specs
- Includes: 1 x Tent Protector Sleeve
- Material: Stainless Steel
- Size: 19" (length) x 4.3" (width)
- Weight: 1 lbs
- Pipe Clamp: 3 screws with wing nuts
Note: Made in Korea. Use at own risk. Must fully support to use with titanium wood stove.